1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Guaranteed Safe Checkout
1. Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore.
2. Changed the propeller to Gemfan 1635-3 propellers.
V3.0 Update log:
1. ELRS RX Version, Flight Controller AIO ESC board change into SuperX HD ELRS Flight Controller
2. Frsky Receiver Versions still v2 version.
3. Changed to A30 connector
Notes:
1. Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.
2. NOT Included Lipo battery!
Specification:
Brand: Happymodel
Model: Moblite7 Walksnail V3
Item Name: 1S 75mm HD Whoop FPV Racing Drone
Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30
Onboard blackbox ready
New V3.0 Version | Old Version | |
Flight Controller | SuperX HD ELRS Flight Controller Betaflight 4.4.2 firmware readyFirmware target: CRAZYBEEF4DXMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270 or ICM42688P (SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this droneBuilt-in 12A(each) Blheli_S 4in1 ESC Dshot300 readBuilt-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware updateBluejay ESC Firmware readyBuilt-in 5V 1A BECBuilt-in voltage detectionNo betaflight analog osd chip | SuperbeeF4 Lite ELRS/FRSKY SPI ELRS version Firmware target: CrazybeeF4SX1280 |
Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support ESC-Configurator and BLHELI_S Suite configuratorFactory firmware: Z-H-30 – Bluejay, 0.19, 48kHzDefault protocol: DSHOT300 | MCU upgraded to EFM8BB21 Currents: 5A continuous peak 6A (5 seconds) |
Onboard Receiver | ELRS Receiver Version: Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHzAntenna: enameled copper wire 31mm lengthTelemetry output Power: <12dBmReceiver protocol: CRSFDefault firmware version: ExpressLRS V3.0.1The same hardware with Happymodel EP1 receiverCould update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through Frsky Receiver: Doesn"t have V3 Version. | ELRS Receiver Version: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Frsky Receiver Version: SPI BUS receiver Frsky D8/D16 compatible ( Transmitter and receiver 1 m from the ground): 100m~200m |
Motor | Model: 1002 20000KVConfigu-ration:9N12PStator Diameter:10mmStator Length:2mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len): Φ13.5mm*12.5mmWeight(g):2.5gNo.of Cells(Lipo):1S only |
Propeller Gemfan 1610-2 Bi-blades ( V1 ) | Weight:0.24gMaterial: PCPitch:1 inchProps Dia:40mmCenter Hole Dia:1.5mm |
VTX | Model: Avatar mini 1s moduleCommunication Frequency: 5.725-5.850 GHzTransmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBml/o Interface: JST1.O*6(Power in)JST1.O*4(USB)Mounting Holes: 25.5*25.5 mmDimensions: 33*33*6.5 mmStorage: 8GRecording: 1080p/720pWeight: 6.8 gOperating Temperature: -20-40℃Channels: 8Wide Power lnput: 3.1V-5VSupported FC System: BetaflightOSD: Canvas modeBitrate: 25mbps / 50mbpsLatency: Average delay 22msAntenna connector: IPEX |
FPV Camera | Model: Avatar nanolmage Sensor: 1/2.7inchsInchResolution: 1080P/6Ofps,720P/120fps,72OP/6OfpsRatio: 16/9 4/3Lens: 2.1mmFOV 170°Aperture: F2.0Shutter: Rolling shutterMin.Illumination: 0.001LuxWeight: 3.5gDimensions: 14*14*17mmCoaxial Cable: 45mm |
Package Included:
1x Moblite7 V3 Walksnail FPV Drone
1x Spare Canopy
1x Propeller disassemble tool
1x Screw driver
A part of the review has been auto-translated.
Wszystko na czas i zgodnie z opisem.
Nur in express... Kaufen D 8 D16 schwieriger Empfang
allgemein kaufe ich hier seit 5 Jahren ein alles ist bisher ca 50 Bestellungen! angekommen in einwandfreien Zustand wenn ich 3 Wochen Zeit habe bestelle ich hier für meist ein von 30 bis 50 Prozent weniger
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.