1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Guaranteed Safe Checkout
Notice: FX17-B Camera and Nano7 Camera will be shipped randomly.
January 20, 2025
Features:
- AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
- Super light 1S 65mm Brushless whoop only 17.7g
- Equipment with the lightest brushless motors-SE0702 only 1.46gram
- FX17-B 1/3 CMOS 800TVL Camera awesome footage
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
Specifications:
Brand: Happymodel
Model: 2024 Mobula6 1S
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81x81x37mm
Weight: 17.7g
Spare parts specifications:
Motor | Mode: SE0702 KV28000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter: Φ1mm Motor Dimension(Dia.*Len): Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
Propellers | Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm |
Flight controller | SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 |
Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 |
Onboard Serial ExpressLRS receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx |
Onboard 5.8G VTX | Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
Camera | Model: FX17-B / Nano7 Image Sensor: 1/3u2033 CMOS Horizontal Resolution: 800TVL Signal System: NTSC Net Weight: 1.9g Dimensions: L14mm*W14mm*H13mm |
Package includes:
Item Name | Qty |
Mobula6 2024 1S 65mm whoop Drone Frame +Canopy | 1 |
SuperX ELRS AIO 5-IN-1 Flight controller | 1 |
SE0702 KV28000 brushless motor | 4 |
Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw) | 1 |
FX17-B / Nano7 1/3 CMOS 800TVL camera NTSC 4:3 | 1 |
Onboard 5.8G 25mw~400mw VTX | 1 |
Spare canopy | 1 |
Propeller disassemble tool | 1 |
Screw driver | 1 |
A part of the review has been auto-translated.
Die Mobula6 2024 fliegt sehr gut, leider ist die Kameraqualität nicht gut und es sind leichte diagonale Streifen im Bild, wenn die Motoren laufen. Die Flugzeit beträgt ca. 3 Minuten mit einem Lava 300 mAh 1S LiHV Akku.
cool Little Quadcopter
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.