1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Guaranteed Safe Checkout
Model | DSO5072P | |
Acquisition | ||
Sample Rate | Real-Time Sample: 1GS/s | |
Inputs | ||
Inputs Coupling | AC, DC, GND | |
Inputs Impendance | 1Mu03a9± 2% //20pF± 3pF | |
Horizontal System | ||
Sample Rate Range | 500MS/s--1GS/s | |
Waveform Interpolation | (sin x)/x | |
Record Length | 40( Kbytes ) | |
SEC/DIV Range | 4ns/div to 40s/div | |
Sample Rate and Delay Time Accuracy | ± 50ppm(at over any ≥1ms time interval) | |
Position Range | 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s | |
u25b3 Time Measurement Accuracy (Full Bandwidth) | Single-shot, Normal mode:± (1 sample interval +100ppm x reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm x reading + 0.4ns); Sample interval = s/div u00f7 200 | |
Vertical System | ||
Vertical Resolution | 8-bit resolution, all channel sampled simultaneously | |
Position Range | 2mV/div to 10V/div | |
Bandwidth | 70MHz | |
Rise Time at BNC( typical) | 5ns | |
Bandwidth Limit | 20MHz | |
Low Frequency Response (-3db) | ≤ 10Hz at BNC | |
DC Gain Accuracy | ± 3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ± 4% for Normal or Average acquisition mode, 5mV/div to 2mV/div | |
Trigger System | ||
Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative | |
Trigger Source | CH1, CH2, EXT, EXT/5, AC Line | |
Trigger Modes | Auto, Normal, Single | |
Coupling Type | DC, AC, Noise Reject, HF Reject, LF Reject | |
Trigger Sensitivity (Edge Trigger Type) | DC(CH1,CH2): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full; DC(EXT): 200mV from DC to 100MHz; 350mV from 100MHz to 200MHz; DC(EXT/5): 1V from DC to 100MHz;1.75V from 100MHz to 200MHz; AC: Attenuates signals below 10Hz; HF Reject: Attenuates signals above 80kHz LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz | |
Trigger Level Range | CH1/CH2: ± 8 divisions from center of screen; EXT: ± 1.2V; EXT/5:± 6V | |
Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns | CH1/CH2: 0.2div x volts/div within ± 4 divisions from center of screen; EXT: ± (6% of setting + 40mV); EXT/5: ± (6% of setting + 200mV); | |
Set Level to 50%(typical) | Operates with input signals ≥50Hz | |
Video Trigger | ||
Video Trigger Type | CH1, CH2: Peak-to-peak amplitude of 2 divisions; EXT: 400mV; EXT/5: 2V | |
Signal Formats and Field Rates, Video Trigger Type | Supports NTSC, PAL and SECAM broadcast systems for any field or any line | |
Holdoff Range | 100ns ~ 10s | |
Trigger Frequency Counter | ||
Readout Resolution | 6 digits | |
Accuracy (typical) | ± 30ppm (including all frequency reference errors and ± 1 count errors) | |
Frequency Range | AC coupled, from 4Hz minimum to rated bandwidth | |
Display | ||
Display Type | 7 inch 64K color TFT (diagonal liquid crystal) | |
Display Resolution | 800 horizontal by 480 vertical pixels | |
Display Contrast | Adjustable (16 gears) with the progress bar | |
Probe Compensator Output | ||
Output Voltage( typical) | About 5Vpp into ≥1Mu03a9 load | |
Frequency(typical) | 1kHz | |
Power Supply | ||
Supply Voltage | 100-120VACRMS(± 10%), 45Hz to 440Hz, CAT II 120-240VACRMS(± 10%), 45Hz to 66Hz, CATII | |
Power Consumption | <30W | |
Fuse | 2A, T rating, 250V | |
Environmental | ||
Temperature | Operating: 32°F to 122°F (0°C to 50°C); Nonoperating: -40°F to 159.8°F (-40°C to +71°C) | |
Cooling Method | Convection | |
Humidity | +104°F or below (+40°C or below): ≤ 90% relative humidity; 106°F to 122°F (+41°C to 50°C): ≤ 60% relative humidity | |
Altitude | Operating: Below 3,000m (10,000 feet); Nonoperaring: Below 15,000m(50,000 feet) | |
Mechanical | ||
Size | Length 385mm, Width 200mm, Height 245mm | |
Weight | 3.5KG(with Packing); 2.08KG(without Packing) |
A part of the review has been auto-translated.
I'm so happy that I got this scope as my very first one, delivery was pretty fast and the box it came in is sufficient to prevent any damage. The probes that I got with this scope are 80MHz rated which is great. My scope came upgraded to 200MHz from the factory so no need to do that yourself, there's new firmware that you can download for this scope on the Hantek website dated 02-25-2021 ( Link: http://hantek.com/uploadpic/hantek/files/20210225/dso5kp_func_dso5072p20210225.rar ) and you can safely install the new firmware without having to worry about losing the upgrade to 200MHz that will stay exactly the same, you can trust me about this because I just did it myself and I didn't know for sure if it would go alright and the seller couldn't tell me either but I assure you the firmware update can be done safely. I also opened the scope just to have a look inside and to my surprise I found that it has a slot for a micro SD, I had one 16GB to spare so I put it in the micro SD slot and now I can save stuff to the internal memory card instead of using a USB-stick. This isn't mentioned anywhere so I thought you might want to know this. This scope will be more than enough for the things that I'm using it for so I'll be using this scope for many years to come, if you are not sure which scope you should buy if you haven't had one before I highly recommend you to buy this scope because it is hard to find a similar one in this class for the price. I've included a couple of pictures to show that the box came in undamaged and that I've installed the new firmware and it's still a 200MHz scope.
Thanks Banggood for the great service, I'm really happy with this scope.
Very good solution for first DSO. exellent user interface, very good quality, i own hantek usb DSO6022BL oscilloscope and i must say that this stand alone solution is far better then usb one. I like that probes compensation is in the socket. Overall very good performance only FFT could be faster but in this price range it is more then good. This DSO is hackable to extend BW to 100MHz but since i work mainly in audio domain i don't need it so will not try for now. I do reccomment purchase.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.